SYNCO G2(A2)
The SYNCO G2(A2) is a dual wireless microphone. It comes from G1(A2) and is reborn with a display to show all main indicators. It continues processing the input audio via patented technology and sending clean, clear audio based on 2.4GHz digital transmission technology. With 1 receiver and 2 transmitters, G2(A2) records two sound sources at the same time, applicable to a wide range of content creations.
المزيد من التفاصيل
TFT Display to Show Key Figures
The SYNCO dual wireless microphone system G2(A2) distinguishes itself from G2(A1) by having the other transmitter to achieve the recording of 2-person dialogue and the flexibility of output modes, and differs from G1(A2) by a true-color TFT display on both transmitter and receiver to make each key figure such as recording mode and battery status, readable under different light intensities.
Upgraded Algorithm for Stable Signal Transmission within 200m
The SyncoderTM Encrypted Transmission Algorithm 4.0 enhances the signal stability of the dual digital microphone system within 656ft/200m (Line-Of-Sight) and 164ft/50m (Non-Line-Of-Sight) effective range. It runs the Frequency Hopping Spread Spectrum (FHSS) technique to detect the location on it’s own intuitive and then by itself turns to the optimal frequency so that no signal conflicts would occur. This also helps protect privacy and reduce interference.
Best Dual Wireless Microphone for Flexible Audio Adjustments
A button is set to mute the system for a while when it comes to team communication, device setup, etc., rather than completely turning off the system. Find this function also in mini wireless microphone G1T/L.
The 6-level gain control on transmitter & receiver and one-click noise reduction function to give a wider range of adjustment, allowing the microphone system to work in more conditions. The real-time monitoring allows you to monitor what is recorded and hear what is input from the recording device.
Safety Channel Mode to Avoid Audio Spikes
The G2(A2) dual wireless microphone comes with three recording modes - Mono, Stereo, and Safety Channel. When the Safety Channel mode is activated, the audio recorded into the right channel will be 6dB lower. This works to avoid unforeseen audio spikes caused by noises from vehicles, weather, etc., saving your audio recording no matter the scenarios.
Integrated Signal Processing Brings Little Latency Output
The Digital Signal Processor (DSP) chip in the professional dual wireless microphone system optimizes the signal from input to output directly. The full synchronization of signal capture, processing, and delivery is a guarantee of the almost zero latency transmission and quality sound production, perfect for immediate use and great for live broadcast.
3-in-1 Quick Charging Supports Each Continued Recording
The 3-in-1 charging solution allows the charging of this 2 channel wireless microphone (2TX+1RX) at the same time with one power source. It takes only 40 min to get the system 50% powered and 1 hour to reach 80%. The capacity-expanded battery supports 8-hour continued working if fully charged.
Pocket Dual Wireless Lavalier Microphone for All Devices
Mobile content creators would like this dual channel wireless microphone system. The transmitter and receiver each weighs only 39g and is 52*42*17mm sized, very easy to be concealed and very inconspicuous in most recording scenarios. The G2(A2) has TRS output as well as universal digital Type-C output, making it compatible with a wide range of devices such as cellphones, laptops, cameras, and even loudspeakers.
The G2(A2) carries magnetic back clips. This allows it to be directly adsorbed on metal surfaces. Supplied magnets help hide the TX inside clothes for low-profile recording.